Complete setup guide: getting your Soku Minute Mattress system ready

Introduction

Preparing the Soku Minute Mattress system correctly is the key to fast, hygienic, large-scale deployment. Whether you are getting ready for an emergency shelter, a large event, or temporary accommodation, this guide takes you through the whole process, from unpacking the inflator to distributing mattresses on site.

Step 1: Inflator setup

• Position the inflator: Choose a stable, clean location with easy access to power. Make sure the area is flat and free of obstructions.
• Power supply: Connect the inflator to a reliable power source (230V or 115V). Confirm that the supply can deliver at least 600W, especially during startup.

Step 2: Mattress production

• Load the mattress cartridge:
  • Insert the mattress film between the two rollers of the inflator.
  • Open the film cover on the inflator.
  • Feed the film through the machine, pulling it until it reaches the end of the film cover.
  • Close the film cover securely.
• Start the inflator: Press the Start button to begin inflation. Press the Stop button once you have produced the number of mattresses you need.

Step 3: Mattress separation and distribution

• Tear off each mattress at the marked tear line immediately after inflation.
• Distribute the mattresses to the sleeping area, or have users collect them.

Need more support or training?
Contact your Soku supplier for technical help, spare parts, or a demonstration for your organization.