Complete setup guide: getting your Soku Minute Mattress system ready

Introduction

Setting up the Soku Minute Mattress system correctly is key to achieving fast, hygienic, and large-scale mattress deployment. Whether you are preparing for an emergency shelter, a large event, or temporary accommodation, this guide will walk you through the entire process from unpacking the inflator to distributing mattresses on-site.

Step 1: Inflator Setup

• Positioning the Inflator: Choose a stable, clean location with easy access to power. Ensure the area is flat and free of obstructions.
• Power Supply: Connect the inflator to a reliable power source (230V or 115V). Verify that the power supply can deliver at least 600W, especially during startup.

Step 2: Mattress Production

• Loading the Mattress Cartridge:
  • Insert the mattress foil between the two rollers of the inflator.
  • Open the foil cover on the inflator.
  • Feed the foil through the machine, pulling it until it reaches the end of the foil cover.
  • Close the foil cover securely.
• Starting the Inflator: Press the Start button to begin mattress inflation. Press the Stop button once you have produced the desired number of mattresses.

Step 3: Mattress Separation and Distribution

• Tear off each mattress at the marked tear line immediately after inflation.
• Distribute the mattresses to the designated sleeping area, or have them picked up by the users.

Need further support or training?
Contact your Soku supplier for technical assistance, spare parts, or to arrange a tailored demonstration for your organization.